In order to register for a webinar you must be a member of our website. If you already have an account, please login.
Register Now Login
What is the protocol to be followed if Isq is low at the time of placement
in a 2 stage case. What is the lowest isq you would restore at.
Excellent presentation, thank you.
Dr. Enrico Wensing US Virgin Islands
Thanks Dr. Marcus for another wonderful presentation. I don’t want to miss your presentation any time. I enjoy and learn lot of things related to Dental Implantology and also I appreciate your confidence. God bless you.
how do I select the correct peg to take an isq measurement
Is there a low limit, where you can asume there is no oseoitegration. For example the lowest value I messured was 8. Is there a chance to wait for higher value?
so if you’ve measured ISQ and not above 70, are you using a new peg each time you recheck ISQ until you achieve a value over 70 every 3-4 weeks?
Hello, thanks for a great lecture! Can other Clinicians see my patients and my data in Osstell Connect?
in full mouth implants, are we using the abutment level isq, how does this work
Was it easy for your Staff to learn how to use OsstellConnect?
When the ISQ-Value is below 70, when do you submerge and when do you use a transgingival approach?
does additional work in the planning in the platforms including osstell connect increase your productivity?
What are the advantages and disadvantages of Osstell connect compared to other platforms? To add all that extra data in yet another place.. isn’t it even more time consuming?
do you utilize osstell selectively or for all of your implant cases?
How long have you been working with digital technology for your implant treatments?
Are Torque and ISQ always the same? Can you obtain a high ISQ yet have recorded a low torque value on insertion. Is there a direct correlation between the two?
will sterile plastic sleeve placed over beacon device used when placing implant affect ISQ value?
What is your experience history with Osstell ISQ? How long have you been using Osstell in your practice?
Is it difficult or time consuming to utilize OsstellConnect as part of your many platforms?
Would you immediately load an implant without ISQ values?
Hello Dr, my question is: how accurate is the ISQ value? Can it always be trusted?
what happens when you can’t seat the peg despite the healing abutment seating fine. presumably the ISQ won’t be accurate? check PA XR showed peg not seated…
What ISQ value should the beacon show for you to feel confident about placing an implant? (immediate loading)
then as Osstell value was above 70, placed a HA but implant moved when placed at 15Ncm. Tried to remove HA which removed implant. Then placed another implant, slightly longer. Torque only 10Ncm this time. Beacon showed measure 70:70 – why did osstell measurement show no correlation to torque values?
how confident are you in the accuracy of Osstell ISQ measurements?
I had a situation today when placing an implant in an osteoporotic patient on Prolia with Type III-IV bone whereby the torque of the implant was about 20Ncm at placement but when the Osstell was used to measure the stability I got a value of 73/73 – checked with 2 separate pegs….. TBC
I have had several cases where the is stips at mid 60’s I’ve torque tested them and there solid. Can I restore or remove. Thanks
Agradecido por la formación. Saludos desde Sevilla, España. Dr Rogelio Álvarez Marin.
If you check the isq multiple times for the same patient, would it be more accurate to use the same peg?
When you get a value that is less than 60 at 3 to 4 weeks, should you then torque test and remove implant?
Thank you for joining today’s webinar! If you have any questions for Dr. Marcus Dagnelid please write them in this chat box and they will be addressed at the end of the presentation.
You must be logged in to post a comment.
Tribune Group GmbH Inc.
Nationally Approved PACE Program
Provider for FAGD/MAGD credit.
Approval does not imply acceptance by
any regulatory authority or AGD endorsement.
7/1/2024 - 6/30/2028.
Provider ID# 355051
36 Comments
What is the protocol to be followed if Isq is low at the time of placement
in a 2 stage case. What is the lowest isq you would restore at.
Excellent presentation, thank you.
Dr. Enrico Wensing US Virgin Islands
Thanks Dr. Marcus for another wonderful presentation. I don’t want to miss your presentation any time. I enjoy and learn lot of things related to Dental Implantology and also I appreciate your confidence. God bless you.
how do I select the correct peg to take an isq measurement
Is there a low limit, where you can asume there is no oseoitegration. For example the lowest value I messured was 8. Is there a chance to wait for higher value?
so if you’ve measured ISQ and not above 70, are you using a new peg each time you recheck ISQ until you achieve a value over 70 every 3-4 weeks?
Is osstell connect easy to learn how to use?
Thank you !
Thanks alot for your lecture
Hello, thanks for a great lecture! Can other Clinicians see my patients and my data in Osstell Connect?
in full mouth implants, are we using the abutment level isq, how does this work
Was it easy for your Staff to learn how to use OsstellConnect?
When the ISQ-Value is below 70, when do you submerge and when do you use a transgingival approach?
does additional work in the planning in the platforms including osstell connect increase your productivity?
What are the advantages and disadvantages of Osstell connect compared to other platforms? To add all that extra data in yet another place.. isn’t it even more time consuming?
Thanks from Chile, beautiful cases!
do you utilize osstell selectively or for all of your implant cases?
How long have you been working with digital technology for your implant treatments?
Are Torque and ISQ always the same? Can you obtain a high ISQ yet have recorded a low torque value on insertion. Is there a direct correlation between the two?
will sterile plastic sleeve placed over beacon device used when placing implant affect ISQ value?
what ISQ will lead you to do 2 stage surgery?
What is your experience history with Osstell ISQ? How long have you been using Osstell in your practice?
Is it difficult or time consuming to utilize OsstellConnect as part of your many platforms?
Would you immediately load an implant without ISQ values?
Hello Dr, my question is: how accurate is the ISQ value? Can it always be trusted?
what happens when you can’t seat the peg despite the healing abutment seating fine. presumably the ISQ won’t be accurate? check PA XR showed peg not seated…
What ISQ value should the beacon show for you to feel confident about placing an implant? (immediate loading)
then as Osstell value was above 70, placed a HA but implant moved when placed at 15Ncm. Tried to remove HA which removed implant. Then placed another implant, slightly longer. Torque only 10Ncm this time. Beacon showed measure 70:70 – why did osstell measurement show no correlation to torque values?
how confident are you in the accuracy of Osstell ISQ measurements?
I had a situation today when placing an implant in an osteoporotic patient on Prolia with Type III-IV bone whereby the torque of the implant was about 20Ncm at placement but when the Osstell was used to measure the stability I got a value of 73/73 – checked with 2 separate pegs….. TBC
I have had several cases where the is stips at mid 60’s I’ve torque tested them and there solid. Can I restore or remove. Thanks
Agradecido por la formación. Saludos desde Sevilla, España. Dr Rogelio Álvarez Marin.
If you check the isq multiple times for the same patient, would it be more accurate to use the same peg?
When you get a value that is less than 60 at 3 to 4 weeks, should you then torque test and remove implant?
Thank you for joining today’s webinar! If you have any questions for Dr. Marcus Dagnelid please write them in this chat box and they will be addressed at the end of the presentation.